Product Overview
This is the "Spacer Eraser Milspec Hammer* Jig" For the Leber V2 trigger housing.
It is intended to be used to eliminate the requirement for a recoil buffer spacer in full size and reverse stretch MP5s (recoil buffer not needed for MP5K) when using the Leber V2 trigger housing, while also promoting smoother and more reliable cycling and ejection in all MP5 & MP5K variants.
Use the jig to round a milspec AR hammer* so the bolt carrier can pass back over it instead of getting stuck behind the unmodified AR15 hammer. Compatible with milspec hammers* only. This version is ONLY compatible with the Leber V2 trigger housing.
Printed in Polymaker PLA Pro.
* Due to minor variations between hammer manufacturers, the jig may require minor modification to fit your hammer. As pictured, the Schmid hammer without a notch fits the jig. Some other brands of hammers that we have tested are slightly longer and required the jig to have some material removed in order to fit the hammer properly.
