Product Overview
This is a 3d printed Safety trip & Anti-Bounce weight and includes 2 printed levers for your CMMG/Ciener/RTB/PSA -style AR22LR bolt group. This will not work with M&P15-22s. We do not accept returns of modified parts.
The Anti-Bounce weight is made up a carrier and 8 tungsten rods. The end user will be able to pick which weight that they prefer to match their barrel length and ammunition type - .28 ounces to 1.2/1.5 * ounces approximately. We have found that a "Super Glue" type adhesive works, as well as common 2 part epoxies for securing the tungsten once the amount of weight has been decided on.
* Total weight of the tungsten rods may vary
No glue or epoxy is included. The steel insert in the weight carrier has been installed with blue loctite, its possible to remove it but we do not advise taking it out. Please check it periodically to ensure it remains tight.
The plastic levers are included in the event that your particular AR22 is picky about the amount of movement in the Push Button Safety. Some AR22s work fine with a steel lever , and others will only run with a plastic lever.
Kit includes 1 trip/1 complete weight/2 levers*.
*Please note, the levers are slightly different sizes to provide a better fit if you are using an older GMR cam or a cam from another vendor.
